Directed Electronics Concept 650 소유자 매뉴얼 - 페이지 10

{카테고리_이름} Directed Electronics Concept 650에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Directed Electronics Concept 650 16 페이지. Directed electronics state-of-the-art motorcycle security system owner's manual 650

페이지 인쇄

Directed Electronics Concept 650 소유자 매뉴얼

Disarming Diagnostics

Extra disarm chirps are the Tamper Alert. If four chirps are heard when

disarming, the system was triggered in your absence. If five chirps are

heard, a zone was triggered so many times that Nuisance Prevention

Circuitry has bypassed that zone. In either case, the Status LED will

indicate which zone was involved (see Table of Zones section). The

system will retain this information in its memory, and chirp four or five

times each time it is disarmed, until the next time the ignition key is

turned on.

Table of Zones

The zone number is the number of LED flashes used by the system to

identify that input. The standard input assignments are listed below,

along with spaces to write in any optional sensors or switches you have

had installed.

ZONE (# of

L.E.D. FLASHES)

If the Warn-Away signal is triggered, the LED will not report it.

DEALER-INSTALLED

OPTIONS

Instant trigger. A heavier

impact trigger from the

DoubleGuard shock sensor

Door switch circuit

Optional hood or trunk pins

or optional sensors

Ignition

DESCRIPTION