Alemite 8571-A5 서비스 매뉴얼 - 페이지 8

{카테고리_이름} Alemite 8571-A5에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alemite 8571-A5 10 페이지. Portable hand-operated pump

SER 8571-5

Outlet Body

7. Install and seat Gasket (34) into the bottom of Outlet

Body (28).

8. Install the Rod assembly into the Outlet Body.

9. Install and seat Gasket (27) into the Outlet Body.

10. Install O-Ring (26) carefully past the cross-hole on the

Rod.

11. Screw Packing Nut (25) into the Outlet Body.

12. Tighten the Packing Nut securely.

13. Install the Tube assembly over the Rod assembly and

screw into the Outlet Body.

14. Tighten the Tube securely into the Outlet Body and at

the same time the Foot Valve Body into the Tube.

Attach Pump Tube to Lever and Cover

15. Screw Knob (10) onto Bracket and Lever Assembly

(9).

16. Install Link (11) into the Bracket and Lever

Assembly.

17. Install Screw (8) that secures the Bracket and Lever

Assembly to the Link.

18. Install Nut (12) onto the Screw.

• Tighten the Nut securely.

19. Install the Bracket and Lever Assembly and Link onto

the Pump Tube Assembly.

20. Install Pin (13) that secures the Link to the Pump Tube

Assembly.

21. Install Pin (7) that secures the Bracket and Lever

Assembly to the Pump Tube Assembly.

22. Install Retaining Rings (6) onto the end s of both Pins.

23. Screw Nipple (3) [with thread sealant on each end]

into the Outlet Body.

• Tighten the Nipple securely.

24. Screw Electronic Meter (2) onto the Nipple.

• See Figure 2 for the proper orientation of the Meter.

• Tighten the Meter securely.

25. Position the Pump Tube Assembly onto Cover (14) as

illustrated in Figure 2.

Revision (12-09)

1-800-548-1191-http://[email protected]

Portable Hand-Operated Pump

Refer to Figure 3 Parts List

for Parts Identification

Figure 5 Pump Tube Assembly 328255-C4 - Section

Alemite LLC