Clarke CBT1300SS 운영 및 유지보수 지침 매뉴얼 - 페이지 9

{카테고리_이름} Clarke CBT1300SS에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke CBT1300SS 17 페이지. Booster pump

• The pump body has been primed correctly and is completely filled

with water.

NOTE: If the pump is gravity or pressure fed, priming will not be

necessary, as the pressure of water will purge the system of air.

It is essential that all connections and hoses are completely air tight or the

system will not work.

The pump should never be operated

with any delivery valve completely

closed.

The pressure gauge should be

monitored after initial operation to

ensure the pressure switch is

operating within the set parameters.

If the gauge rises above the switch's

pre-set value, switch the pump off

and reset the switch.

CARE AND MAINTENANCE

Protect the pump and pipework from freezing as the formation of ice may

cause serious damage.

The only maintenance required is a regular inspection to ensure that debris is

not blocking the passage of water through the pump. Should sand, chemical

or other contaminants come into contact with the pump, flush through with

cold clean water as soon as possible.

Periodically unscrew the filter bowl and clean out the cartridge and interior of

any debris collected.

If you suspect the pump is blocked by debris etc, disconnect it from the power

supply and back-flush to clear any blockage using a garden hose.

• You will need to disconnect the outlet hose to do this.

Always keep the pump in a clean condition, checking regularly for loose

fastenings or a damaged power cable etc.

The pump should not be taken apart by the user if overhaul is required, but

should be taken to your nearest CLARKE dealer for repair.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]