Clarke CD1-1 운영 및 유지 관리 지침 - 페이지 3

{카테고리_이름} Clarke CD1-1에 대한 운영 및 유지 관리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke CD1-1 11 페이지. Petrol driven water pump

Installation

WARNING! Never run the engine in an enclosed space. Ensure adequate

ventilation at all times.

The pump must be situated on a firm, flat, level surface. Make sure that

the pump is placed away from the edge of any pit or pool and cannot

fall in. The suction and discharge fittings supplied with the pump are suitable

for 1" I.D. hose (not supplied). For best performance, keep the suction

pipe as short as possible, and make sure that all connections are airtight.

The pump will not work with air in the suction pipe.

For applications where the suction level is below the pump, we

recommend the use of a foot valve (non-return valve) to retain water in

the suction pipe. To prevent clogging of the pipes or pump, we suggest

that you fit a suction strainer to the end of the suction pipe.

Protect the pipework and the pump from freezing as the formation of ice

in the pump can cause damage. If the pump is installed in a location

likely to freeze, drain the pump (by removing the pump drain plug), and

the pipework after use.

General Arrangement