Clarke CPPRSS 빠른 시작 매뉴얼

{카테고리_이름} Clarke CPPRSS에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke CPPRSS 2 페이지. Chemical plunger pump

CHEMICAL PLUNGER PUMP

INTRODUCTION

Thank you for purchasing this CLARKE chemical plunger pump,

Suitable for water, alcohol, petroleum, diesel, paraffin, lubricant, water-based chemicals, acid and alkaline solutions.

Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully.

LIST OF CONTENTS

• 1 x Pump

• 1 x Handle assembly

• 2 x Nuts and Bolts

ASSEMBLY

1. Remove the nut from the pump as shown.

FITTING THE

1. Connect the handle as shown and secure at

each point using the small nuts and bolts.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

FITTING THE OUTLET TUBE

HANDLE ASSEMBLY

• 1 x Outlet tube

• 1 x Extension Inlet tube

• 1 x 2 piece telescopic extension with filter

2. Place the nut over the outlet tube and back

onto the pump

FITTING THE TELESCOPIC EXTENSION TUBE

1. Fit the telescopic extension with filter together

as shown

MODEL NO: CPPRSS

PART NO:

PART NO: 6499630