Directed Electronics Viper 106V 소유자 매뉴얼 - 페이지 9

{카테고리_이름} Directed Electronics Viper 106V에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Directed Electronics Viper 106V 12 페이지. Thatcham evaluated touch-key immobiliser system

페이지 인쇄

1. Disarming Without a Touch Key

using your system

Use the procedures below to arm and disarm the immobiliser.

arming

When the vehicle's ignition is turned Off, the immobiliser will start a 30-

second timer and the LED will flash at a rapid rate. During this period the

immobiliser arming can be canceled by turning the vehicle's ignition On.

After the 30-second timer expires, the immobiliser is armed (starter,

ignition, and fuel pump are immobilised). The LED flashes once per sec-

ond when in the armed state.

disarming

To disarm the system, insert the touch key into the touch key receptacle

and hold until the LED illuminates continuously for 1-second. Remove the

touch key the LED will extinguish. The system is now disarmed.

disarming without a touch key

This procedure allows you to disarm the system without the touch key

should it be lost, damaged, or disabled. In order to disarm without a

touch key, you must have the vehicle's ignition key, and have the PIN

code.

Turn the ignition On, then Off, 6-times.

Turn the ignition On a 7

time.