Clarke CSV1A 운영 및 유지보수 지침 매뉴얼 - 페이지 5
{카테고리_이름} Clarke CSV1A에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke CSV1A 17 페이지. Submersible water pump
Clarke CSV1A에 대해서도 마찬가지입니다: 운영 및 유지보수 지침 매뉴얼 (13 페이지)
페이지 인쇄
- 1. Pump Specification
- 2. Safety Precautions
- 3. Electrical Connections
- 4. Using the Pump
- 5. Maintenance
- 6. Troubleshooting
- 7. Declaration of Conformity
- 8. Exploded Parts Diagram - Csv1A/2A
- 9. Parts List
- 10. Exploded Parts Diagram - Cse2
- 11. Environmental Recycling Policy
- 12. Exploded Parts Diagram - Csd3
PREPARATION
WARNING: DISCONNECT THE PUMP FROM THE MAINS POWER SUPPLY
BEFORE CONNECTING THE MULTI HOSE ADAPTOR.
1.
Fit the elbow adaptor to the
pump outlet as shown in the
diagram opposite.
2. Screw the multi-hose adaptor
onto the elbow.
• The multi hose adaptor is
capable of accepting 1",
"
¾
½
and
" hoses.
3.
Simply cut the multi hose
connector to the required size
and attach a suitable hose using
with a worm drive clip.
• For maximum efficiency, we
strongly recommend that you
connect a 1
to the multi hose adapter.
• Alternatively, you may remove
the multi adapter altogether,
and screw on a 1
The pump is completely submersible and should be placed in a vertical
position on a solid flat surface, placing the pump on a couple of house bricks if
required.
SUITABLE HOSES AND SPARE/REPLACEMENT MULTI HOSE ADAPTERS ARE
AVAILABLE FROM YOUR CLARKE DEALER.
¼
" diameter hose
¼
" BSP hose adapter.
ELBOW
½
"
¾"
1"
5