Clarke HSE Series 운영 및 유지 관리 지침 - 페이지 8

{카테고리_이름} Clarke HSE Series에 대한 운영 및 유지 관리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke HSE Series 20 페이지. Submersible pumps

As the water level rises, the switch will float and start the pump. As the water

level falls, so will the float switch, until it stops the pump. Float switches are

factory set to provide the correct ON-OFF switching mode.

•

It is not recommended that these pumps be used for pumping

drinking water, as there is a remote possibility of water

contamination due to leakage of pump lubricant should the pump

malfunction or the oil seal become damaged.

All HSE pumps are provided with a thermal overload cut-out, so that in the

event the pump becomes overheated (due to becoming blocked etc.) the

pump will shut off

thermal overload will cool down and re-set and the pump can be re-started.

automatically. When the blockage has been cleared, the