Clarke HSE130 운영 및 유지 관리 지침 - 페이지 8

{카테고리_이름} Clarke HSE130에 대한 운영 및 유지 관리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke HSE130 20 페이지. Submersible pumps
Clarke HSE130에 대해서도 마찬가지입니다: 운영 및 유지보수 지침 매뉴얼 (17 페이지)

페이지 인쇄
Clarke HSE130 운영 및 유지 관리 지침
As the water level rises, the switch will float and start the pump. As the water
level falls, so will the float switch, until it stops the pump. Float switches are
factory set to provide the correct ON-OFF switching mode.
•
It is not recommended that these pumps be used for pumping
drinking water, as there is a remote possibility of water
contamination due to leakage of pump lubricant should the pump
malfunction or the oil seal become damaged.
All HSE pumps are provided with a thermal overload cut-out, so that in the
event the pump becomes overheated (due to becoming blocked etc.) the
pump will shut off
thermal overload will cool down and re-set and the pump can be re-started.
automatically. When the blockage has been cleared, the
8