Clarke HSEC651A 운영 및 유지 관리 지침 - 페이지 7

{카테고리_이름} Clarke HSEC651A에 대한 운영 및 유지 관리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke HSEC651A 20 페이지. Submersible pumps
Clarke HSEC651A에 대해서도 마찬가지입니다: 운영 및 유지보수 지침 매뉴얼 (17 페이지)

페이지 인쇄

OVERVIEW

MAINS CABLE

FLOAT

SWITCH

The CLARKE HSE range of submersible pumps are of rugged and durable

construction, designed for long lasting continuous operation. They are

suitable for discharging pools, ponds, fountains, pits and any waste water

drainage. They can handle foul water containing sewage or other

suspended material including sand up to a maximum of 3kg/m

amount stated in the specifications for each model. They may be used for

pumping water, (including seawater) or water containing small solids in

suspension with particle sizes of up to 6-10mm in diameter, dependant upon

the size of pump. The pumps are not suitable for handling inflammable,

corrosive, explosive or dangerous liquids.

The range includes models 130, 200, 300/301, 360/361 and 650/651 as

itemised in the Technical Specification on page 16.

The HSEC650 & HSEC651A are fitted with a tungsten carbide cutter, and is

specially suited for heavily polluted water and waste solids, such as sewage,

light slurry, factory waste etc. The HSE200 is fitted with a strainer to prevent the

ingress of foreign matter.

Float switches are fitted to those models bearing an 'A' suffix, meaning the

pump will stop and restart automatically as the surrounding water level

changes. This makes them suitable for permanent or semi-permanent

installations, eg. installations where it is necessary to maintain a water at a

particular level without an operator in attendance.

LIFTING HANDLE

DISCHARGE

OUTLET

STRAINER

PROTECTED

INLET

to an