Clarke LEP1A 7260060 운영 및 유지보수 지침 매뉴얼 - 페이지 4
{카테고리_이름} Clarke LEP1A 7260060에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke LEP1A 7260060 12 페이지. Clean water pump
페이지 인쇄
FOR YOUR OWN SAFETY
KEEP CHILDREN AWAY
•
Do not allow children to touch the pump, cables or connections.
USE A RESIDUAL CURRENT DEVICE:
•
The pump must be connected to a high sensitivity residual current device (RCD)
which has a tripping current of less than 30mA.
STORAGE
•
When not in use, the pump should be stored in a dry, secure place out of the
reach of children.
WATER TEMPERATURE
• Do not use the pump if the water is liable to freeze, as this can cause damage to
the pump.
MAINS SUPPLY
•
Disconnect the pump from the mains supply when not in use.
REPAIRS
•
Have the pump repaired by a qualified person.
DO NOT ABUSE THE MAINS LEAD
•
Never carry the pump by the mains lead.
•
Never pull the mains lead to disconnect the pump from the mains socket.
•
Keep the mains lead away from heat, oil and sharp edges.
•
Always check the plug, mains cable and float switch cable for damage before
use. Do not use the pump if damaged. Refer to qualified service personnel for
repair.
•
If you have to use an extension lead with this product, it must be designed for
outdoor use and incorporate a cable suitable for use with Class I appliances.
•
Do not lower the pump using the mains lead, Always use the handle with a rope
or cord attached if necessary,.
DO NOT ABUSE THE FLOAT SWITCH
• Do not lift the pump by the mains or float switch cables.
4