Clarke PSE2A 운영 및 유지보수 지침 매뉴얼 - 페이지 5

{카테고리_이름} Clarke PSE2A에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke PSE2A 11 페이지. Clean water pump

ELECTRICAL CONNECTIONS

Connect the mains lead to a standard, 230 Volt (50Hz) electrical supply through an

approved 13 amp BS 1363 plug, or a suitably fused isolator switch.

WARNING! THIS APPLIANCE MUST BE EARTHED

IMPORTANT: The wires in the mains lead are coloured in accordance with

the following code:

Green & Yellow

As the colours of the flexible lead of this appliance may not correspond with the coloured

markings identifying terminals in your plug proceed as follows:

•

Connect GREEN & YELLOW wire to terminal marked with a letter "E" or Earth

symbol " " or coloured GREEN or GREEN & YELLOW.

•

Connect BROWN wire to terminal marked with a letter "L" or coloured RED.

•

Connect BLUE wire to terminal marked with a letter "N" or coloured BLACK.

If this appliance is fitted with a plug which is moulded onto the electric cable (i.e. non-

rewireable) please note:

The plug must be thrown away if it is cut from the electric cable. There is a danger of

electric shock if it is inserted into a mains power socket.

Never use the plug without the fuse cover fitted.

When replacing a detachable fuse carrier, ensure the correct replacement is used

(as indicated by marking or colour code).

Replacement fuse covers can be obtained from your local dealer or most electrical

stockists.

FUSE RATING

The fuse in the plug must be replaced with one of the same rating (13 amps) and this

replacement must be ASTA approved to BS1362.

We strongly recommend that this machine is connected to the mains supply via a

Residual Current Device (RCD)

If in any doubt, consult a qualified electrician. DO NOT attempt any repairs yourself.

Earth

Blue

Neutral

Brown

Live