Alemite 8120-3116 서비스 매뉴얼 - 페이지 4

{카테고리_이름} Alemite 8120-3116에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alemite 8120-3116 6 페이지. Large capacity hose reel

SER 8120

1. Apply thread compound to connecting gooseneck (1) and

delivery hose fitting threads (2).

2. Hand thread delivery hose fitting (2) into gooseneck (1).

Figure 6 Large Capacity Hose Reel - Delivery Hose

3. Using a wrench, firmly hold gooseneck (1) while

tightening delivery hose fitting (2).

4. With delivery hose fully extended and control valve

open, charge hose to purge system of gases. When fluid

appears at control valve, close valve. This prevents

flattening of hose and excessive pressure on drum when

fluid supply is reinitialized at a later time.

CAUTION

Before replacing the motor, remove electrical power

and fluid pressure from reel.

1. Loosen (do not remove) bolts (1) securing motor (2) to

reel.

2. Slide motor and remove chain.

3. Remove bolts securing motor.

4. Install replacement motor.

Alemite LLC

To order call 1-800-548-1191 or visit www.partdeal.com - [email protected]

Figure 7 Large Capacity Hose Reel - Motor

Replacing the Chain

CAUTION

Before replacing the chain, remove electrical

power and fluid pressure from reel.

1. Loosen (do not remove) bolts securing motor (2)

to reel.

2. Remove chain master-link.

3. Install replacement chain (1).

4. Adjust chain tension by moving motor. Adjust to

allow between ¼" and ½" play in chain. Over

tensioning results in reduced motor life.

Figure 8 Large Capacity Hose Reel -

Replacing the Chain

Large Capacity Hose Reel

Revision (9-11)