Directed Electronics Failsafe 103T 소유자 매뉴얼 - 페이지 11

{카테고리_이름} Directed Electronics Failsafe 103T에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Directed Electronics Failsafe 103T 15 페이지. Failsafe starter kill

The LED will remain lit when the unit is in Valet Mode and the igni-

tion is off. As a power-saving feature, the LED will turn off after 60

minutes and will come back on each time the ignition is cycled.

When the ignition is on, the LED will automatically turn off.

Operation as an

ESP Interface

When using the 103T as a serial interface for a DEI ESP security

system, the 103T keypad can be used to control the ESP system's

basic functions, such as panic, Valet Mode and emergency override.

In this mode, the LED on the keypad functions as the main system

LED, and the keypad's trigger sequence and the passive arming are

disabled.

Please refer to your ESP system owner's guide for detailed descrip-

tions of the following functions that can be controlled by the 103T

keypad.

When disarming your ESP system, the ignition may be turned on or

off. To disarm the ESP system:

Enter your personalized PIN code.

Press

. The system is now disarmed.

2000 Directed Electronics, Inc.