Clarke PSV7A 운영 및 유지보수 지침 매뉴얼 - 페이지 5
{카테고리_이름} Clarke PSV7A에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke PSV7A 13 페이지. 750w submersible pump with folding base and float switch
페이지 인쇄
ASSEMBLY
Remove all packaging and make sure that the unit has no visible damage.
Dispose of all packaging appropriately.
FITTING THE ELBOW
1. Screw the elbow into the outlet
port as shown.
2. Connect a suitable hose (not
supplied) to the pump outlet.
• Suitable hoses are available
from your local Clarke dealer.
FITTING THE HOSE ADAPTER
A hose adaptor can be screwed
onto the elbow if required.
1. Trim the adaptor to the required
size.
• Reducing the hose diameter
will effect the maximum flow
rate.
2. Connect a suitable hose (not
supplied) to the pump outlet.
• Suitable hoses are available from your local Clarke dealer.
FOLDING BASE
The pump has three folding feet
fitted to the base.
• When the feet are in the closed
position, the space between
the base of the pump and the
supporting surface is reduced
to around 5 mm, limiting the
passage of solids in suspension.
when the feet are closed the
pump should only be used for
pumping clean water.
• When the feet are opened the pump can be used with solids in
suspension of up to a rated maximum of 30 mm in diameter.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
5