Clarke PTP100 운영 및 유지보수 지침 매뉴얼 - 페이지 6
{카테고리_이름} Clarke PTP100에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke PTP100 8 페이지. Pressure test pump
페이지 인쇄
5. If the system is free from leaks, the pressure shown on the gauge will not
drop during the test period. If the pressure is being lost, there is a leak in the
system and a visual inspection should be made to locate the leak.
6. After testing, open the relief valve to release all pressure and allow water to
flow back into the reservoir before disconnecting the pump from the
tested system and re-sealing the point of connection.
7. Where the system has been temporarily sealed for testing, ensure the
system is returned to its original condition.
TYPICAL SYSTEM LAYOUT
COMPONENT PARTS
No
Description
1
Handle grip
2
Handle
3
Circlip
4
Drop arm
5
Spindle
6
Axle
7
Piston
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
Qty
No
Description
1
8
Steel ball
1
9
Airtight gasket
6
10
Casting body
2
11
Airtight gasket
2
12
M6 x 20 screw
1
13
Cover plate
1
14
Relief valve
6
Qty
1
1
1
1
1
5
1