Directed Electronics PS-4461TWE-FM 사용자 설명서 - 페이지 14

{카테고리_이름} Directed Electronics PS-4461TWE-FM에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Directed Electronics PS-4461TWE-FM 20 페이지. Two-way 6-button lcd automatic/manual transmission remote starter

페이지 인쇄

To Enable the LED: Press and hold

and

pause for 2 seconds, then beeps once again. Release the buttons. The parking light will flash 1

time.

Temperature Request (If ACC Temp 100 installed)

The user can request the temperature in the vehicle if a Temperature Sensor Module (ACC-Temp-

100) is installed:

Through advance function remote's menu (page-6), select L-01.

Immediately press the

button and hold it until the temperature is displayed on the

LCD screen.

Advanced Features: Installation programmable Options

The remote starter was designed with flexibility and OEM integration in mind. With its program-

mable options, this unit can single-handedly control nearly any electrical system in your vehicle.

Caution

: The programming of your system should be left to a professional. Changing any

one of the settings may affect the operation of your remote starter.

Ignition controlled Door Locks

This is an added security feature. If your Remote Car Starter was installed with the Ignition-

Controlled Door Locks option, the doors will automatically lock as soon as the ignition key is turned

to the IGNITION ON (RUN) position while the brakes are pressed. The remote car starter will also

lock any door that was unlocked and opened (then closed) the next time the brake pedal is

pressed. When the key is turned to the OFF position, the doors will automatically be unlocked.

Secure Lock

Before it can remote-start your vehicle, the remote starter must first disarm the factory security

system. The secure lock feature may be required on certain vehicle models with factory security

systems that automatically unlock the doors when the security system is disarmed. To keep your

vehicle protected when the factory security system is disarmed for a remote start, secure lock will

relock your doors as soon as the vehicle has started. Once the engine run cycle ends, secure lock

will rearm your factory security system.

Safe Start

This feature will eliminate accidental remote starts, e.g. when children are playing with the

transmitter.

Safe start enabled: If this feature is enabled, the user must press the

3 seconds to remote-start the vehicle.

Swap start: If this feature is enabled;

Through advance function remote's menu (page-6), select L-01.

Press

to remote start the vehicle.

The AUX 2 output can be activated by pressing the

Engine Run Time

On a gas engine, the Remote Car Starter can be programmed to run the engine for 3, 15, or

25 minutes (15 minutes by default). On a diesel engine, the Remote Car Starter can be

programmed to run the engine for 8, 20, or 30 minutes (20 minutes by default).

P.14

simultaneously until the remote beeps once,

button twice within

button.

User Guide