Directed Electronics Valet 712T 소유자 매뉴얼 - 페이지 10

{카테고리_이름} Directed Electronics Valet 712T에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Directed Electronics Valet 712T 19 페이지. Dei valet 712t car alarms: owners guide

페이지 인쇄

➜

unlocking/disarming

Pressing

for one second disarms the system and unlocks the

doors (if connected). The horn will honk twice (if connected and

in audible mode) and the parking lights will flash twice to confirm

disarming of the system. The optional Failsafe

deactivated. The status LED will turn off, unless the system is pro-

grammed for Passive Mode. In Passive Mode, the status LED will

flash rapidly when the system is disarmed. This indicates that the

system will re-engage the starter kill and re-lock the doors (if

Passive Locking has been programmed) in 30 seconds unless the

ignition is turned on.

note: If the system has been armed with the remote trans-

mitter, you must use the transmitter or the Valet switch

to disarm the system and deactivate the starter kill.

Manually unlocking the vehicle does not disarm the sys-

tem; it will only unlock the doors.

➜

disabling the system without a transmitter

If your remote transmitter is lost or damaged, you can manually

override the system. To do this, you must have the vehicle's igni-

tion key and know where the Valet

check with the installer for the location of the Valet

Starter Kill will be

switch is located. Be sure to

switch.