CTEK 1054 매뉴얼 - 페이지 2
{카테고리_이름} CTEK 1054에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CTEK 1054 6 페이지.
페이지 인쇄
ManUaL
cOngraTULaTiOnS
to the purchase of your new professional switch mode battery charger. This charger is
included in a series of professional chargers from CTEK SWEDEN AB and represents the
latest technology in battery charging.
SUPPLY PLUg*
cTEK cOMFOrT cOnnEcT
chargE caBLE
cTEK cOMFOrT cOnnEcT – eyelet M6
*Supply plugs may differ to suit your wall socket.
MainS caBLE
XC 0.8
6V/0.8A
cTEK cOMFOrT cOnnEcT – clamp
Autogoods "130"
charging
1. Connect the charger to the battery.
2. Connect the charger to the wall socket. The error lamp will indicate if the battery
clamps are incorrectly connected. The reverse polarity protection will ensure that the
battery or charger will not be damaged.
3. Follow the indication lamps through the charging process.
The battery is fully charged when
4. Stop charging at any time by disconnecting the mains cable from the wall socket.
DESULPHATION
BULK
ABSORPTION
ErrOr LaMP
is lit.
FULLY chargED
PULSE, MainTEnancE charging
EN • 3
XC 0.
6V/0.