CTEK CHARGESTORM CONNECTED 2 사용자 설명서 - 페이지 4

{카테고리_이름} CTEK CHARGESTORM CONNECTED 2에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CTEK CHARGESTORM CONNECTED 2 20 페이지.
CTEK CHARGESTORM CONNECTED 2에 대해서도 마찬가지입니다: 사용자 설명서 (19 페이지)

페이지 인쇄
CTEK CHARGESTORM CONNECTED 2 사용자 설명서

To charge the vehicle

Open access & RFID access
A
B
The charging station can operate in two different
authentication modes, open access (A) and RFID
access (B). Open access means that the charging
starts immediately when the vehicle is connected
to the charging station. RFID access means that the
charging does not start until a RFID tag has been
used for authentication. Some operators also offer
additional authentication, such as a mobile app.
NOTE: There are many different RFID formats.
Contact CTEK if your RFID tags are not original CTEK
RFID tags to make sure that your RFID tags are
compatible with the charging station. The supported
RFID standard is ISO1443A/Mifare.
To connect CHARGESTORM®
CONNECTED to the vehicle
1
2
4

To start charging with open access

1
2
User & installation instructions

To start charging with RFID access

1
2
3
< 1 cm
4
5
6
NOTE: CTEK recommend keeping EV charger
firmware up to date.
CTEK AB