Clarke JETSTAR 1700 운영자 매뉴얼 - 페이지 4
{카테고리_이름} Clarke JETSTAR 1700에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke JETSTAR 1700 20 페이지. Ultra speed burnisher
Clarke JETSTAR 1700에 대해서도 마찬가지입니다: 운영 및 유지 관리 지침 (8 페이지)
페이지 인쇄
OPERATOR SAFETY INSTRUCTIONS (cont.)
WARNING: To avoid injury keep hands, feet and loose clothing away from all moving parts of this machine.
CAUTION: The machine is heavy. Get assistance before attempting to transport or move it.
CAUTION: To prevent serious damage to the floor surface, when using burnisher, make sure the machine
is always moving forward or backward when the pad is in contact with the floor.
CAUTION: To prevent overloading motor, do not use burnisher for wet scrubbing. There is no skirt on
burnisher to contain water. Water could splatter.
FEATURES AND SPECIFICATIONS
Electric burnishers are floor polishing machines. They are operated by moving them forward and backward
across the floor. Note: Do not use the machine for wet scrubbing.
CAUTION:
To prevent serious damage to the floor surface, make sure the machine is always moving forward
or backward when the pad is in contact with the floor.
Specifications
Model
Voltage (V)
Frequency (Hz)
Current (A)
Operators Handle
Pad Driver
Burnishing Swath
Pad Speed (rpm)
Motor Horsepower
Power Cable Length (ft)
Weight (lbs.)
Part No.
Description
976289
Top Line
976326
Natural Blend
976235
UHS Tan
Buffer
976236
UHS Aqua
Buffer
Page - 4 -
01193B
120
50/60
12.5
plastic
20"
20"
1700
1.5
50
82
19" (48cm) 3M Burnishing Pad Selection Chart
Application
Use
Burnish
Dry
Burnish
Dry
Burnish
Dry
Burnish
Dry
CLARKE TECHNOLOGY Operator's Manual - Ultra Speed Burnisher 1700
RPM
Color
1500-3000
Peach
1500-3000
Off White
1500-3000
Tan
1500-3000
Aqua
Finish
Hard finish/high traffic
Soft finish/low traffic
Hard finish/high traffic
Soft finish/low traffic
High traffic/low
Maintenance
Hard finish/high traffic
Wet-look hard finish
Soft finish/low traffic
Wet-look soft finish