alphatronics UNii 설치 매뉴얼 - 페이지 4
{카테고리_이름} alphatronics UNii에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. alphatronics UNii 11 페이지.
페이지 인쇄
EN
Mounting
The backplate should be mounted with 4 screws (4,2 x 20mm) and eventual matching plugs on a flat
surface. When the backplate is mounted on a surface other than brick, the appropriate screws (and plugs)
for that particular surface must be used. The screw holes are located at the bottom left- and right and top
left- and right of the housing.
Close the casing firmly until you hear a clicking sound, the connectors in the backplate need to make
contact with pins on the pcb board in the front cover. Ensure the front cover is entirely closed, see picture
below.
Housing
not
closed properly
Housing closed properly
4