alphatronics AlphaVision XL 설치 지침 - 페이지 4

{카테고리_이름} alphatronics AlphaVision XL에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. alphatronics AlphaVision XL 4 페이지.

B
D
3 mounting holes for keypad
Figure 1 – AlphaVision XL / ML keypad front and back plate
From hardware revision 1.7 it is possible to adjust the brightness of the backlight (silicone keypad and LCD display). This also
applies for the volume of the buzzer.
Brightness = hold the
Buzzer volume =hold the
Dipswitchs
SW 1..3
RS-485 address settings of the keypad
SW 4
bridge the tamper contact
SW 5
not used
SW 6
not used
Specifications
Wieght
Dimensions
Power supply
Current drain nominal (backlight OFF)
Current drain nominal (backlight ON)
Current drain MAX
Temperature
EN50131 Compliance
The AlphaVision XL/ML keypad is tested en approved according to EN50131-3: 2009 by Telefication
Security grade 3, Environmental class 2.
and complies with
WEEE-declaration
This Alphatronics product is manufactured with the most modern technology and consists of high quality
components. Most of the components used can be recycled.
The symbol means that this product should be recycled separately and not put in the normal waste bin
together with normal household waste.
This product can be handed over to your local city council disposal point, shop or supplier .
© Alphatronics B.V. – 2014
Installation instruction AV-XL/ML instruction
button pressed and use the
button pressed and use the
Rev.1.2
2 extra mounting holes
for anti-tamper
protection.
This is only necessary
for Grade 3 compliant
installations
C
A
and
buttons to adjust the brightness.
and
buttons to adjust the buzzer volume.
ON = bridged
LCD
165mm x 125mm x 26mm (HxBxD)
15mA
90mA
100mA
15-07-14
LCD/PROX
271g
9-15-5VDC
65mA
140mA
150mA
0 – 40°C
(www.telefication.com)