Directed Video VC2050 소유자 설치 매뉴얼 - 페이지 15

{카테고리_이름} Directed Video VC2050에 대한 소유자 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Directed Video VC2050 18 페이지. Directed electronics video cassette recorder with tv tuner owners guide vc2050

페이지 인쇄

AUDIO OUTPUT

Press ENTER to change the AUDIO OUTPUT. The VCR can record a

program in stereo. It can also be set to record the secondary

Audio Program (SAP) of any broadcast with second language

audio. The VCR records the same audio on both the Hi-Fi and lin-

ear tracks on the tape.

CHANNEL SETUP

When the VCR memorizes all the available channels, you can use

CH/TRK to select channel. Select the CHANNEL SETUP using

SHIFT and ENTER.

Setting the Source

Before the VCR can memorize available channels, you must

set the signal source for your VCR, leave ANTENNA

displayed in the ANT/CABLE screen. If you have a cable

system hooked up to your VCR, press ENTER to change to

CABLE TV.

Auto Channel Memory

Select to activate the auto channel memory. Your VCR will

begin scanning through available channels. To interrupt,

press MENU on the remote control. When the channel

number on screen stops changing, the VCR has finished.

Channel Add/delete

You can add or delete channels that have been memorized

by the Automatic Channel Memory function. Press ENTER

to add the selected channel. Press SHIFT to delete the

selected channel.

NOTE: The Auto Channel Memory function must be performed before

Channel Add/delete can be used.

VCR OUTPUT CH

VCR sends the output signals to channel 3 or 4 on your TV. Set

the output channel on the menu to 3 CH or 4 CH, whichever is

vacant in your area.