Clarke CCS185 운영 및 유지보수 지침 매뉴얼 - 페이지 12

{카테고리_이름} Clarke CCS185에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke CCS185 17 페이지. 185mm circular saw

MAINTENANCE

WARNING: DISCONNECT THE CIRCULAR SAW FROM THE MAINS SUPPLY

BEFORE FITTING REPLACEMENT BLADES, CLEANING OR ADJUSTMENT.

Keep the machine clean by wiping off dust with a clean cloth.

1. Press and hold the Blade lock and

remove the blade clamping

screw using the hexagon key

supplied by turning it anti-

clockwise.

• The blade will rotate until the

blade lock is fully engaged.

2. Retract the lower blade guard

using the retracting lever and

replace the blade.

• Make sure you pay attention to

the blade direction marking on

the blade.

• Spare blades are available

from your local Clarke dealer.

3. Replace the blade clamping

screw by hand until it is holding

the blade in position.

4. Press and hold the blade lock and turn the blade by hand until the blade

lock is fully engaged.

5. Tighten the blade clamping screw using the hexagon key supplied.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]