Clarke CCS185 운영 및 유지보수 지침 매뉴얼 - 페이지 4

{카테고리_이름} Clarke CCS185에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke CCS185 17 페이지. 185mm circular saw

1. Do not force the power tool. Use the correct accessories for your application. The

correct power tool will do the job better and safer at the rate which it was designed

for.

2. Do not use the power tool if the switch does not turn it on and off. Any power tool that

cannot be controlled with the switch is dangerous and must be repaired.

3. Disconnect the plug from the power source before changing accessories, or storing

power tools. Such preventive safety measures reduce the risk of starting the power

tool accidentally.

4. Store idle tools out of the reach of children and do not allow persons unfamiliar with

the power tool or these instructions to operate it. Power tools are dangerous in the

hands of untrained users.

5. Maintain power tools. Check for misalignment or binding of moving parts, breakage

of parts and any other condition that may affect the power tool's operation. If

damaged, have the power tool repaired before use. Many accidents are caused

by poorly maintained power tools.

6. Use the power tool and accessories in accordance with these instructions and in the

manner intended, taking into account the working conditions and the work to be

performed. Use of the power tool for operations different from intended could result

in a hazardous situation.

7. The performance of this tool may vary, depending upon variations in line voltage.

Extension cable usage may also affect performance.

SERVICE

1. Have your power tool serviced by qualified service personnel using only identical

replacement parts. This will ensure that the safety of the power tool is maintained.

SAFETY INSTRUCTIONS FOR ALL SAWS

a. Keep hands away from cutting area and the blade. Keep your second hand on

the auxiliary handle, or motor housing. If both hands are holding the saw, they

cannot be cut by the blade.

b. Do not reach underneath the workpiece. The guard cannot protect you from the

blade below the workpiece.

c. Adjust the cutting depth to the thickness of the workpiece. Less than a full tooth

of the blade teeth should be visible below the workpiece.

d. Never hold the piece being cut in your hands or across your leg. Secure the

workpiece to a stable platform. It is important to support the work properly to

minimise body exposure, blade binding, or loss of control.

e. Hold the power tool by insulated gripping surfaces when performing an

operation. Contact with a"live" wire will also make exposed metal parts of the

power tool "live" and shock the operator.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]