Clarke CPS85 운영 및 유지보수 지침 매뉴얼 - 페이지 10

{카테고리_이름} Clarke CPS85에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke CPS85 17 페이지. 85 mm plunge saw

ADJUSTMENT

WARNING: ALWAYS DISCONNECT THE SAW FROM THE POWER SUPPLY

BEFORE MAKING ADJUSTMENTS.

SETTING THE CUTTING DEPTH

1. Unlock the depth setting clamp.

2. Move the indicator to the desired

cutting depth on the scale.

3. Lock the depth setting clamp

again.

NOTE: We recommend that the

cutting depth is set

approximately 2 mm greater

than the material thickness.

This could help to achieve a

clean cut.

The machine can generate a large amount of dust during cutting. When

equipped with the supplied dust extractor adapter, the chips and cutting

debris can be removed away from the working area.

1. Connect the small end of the dust

pipe to the dust extraction nozzle.

2. Connect the other end of the dust

pipe to your dust extractor.

• Switch on the dust extractor

while cutting.

NOTE: See your local Clarke dealer

for our latest range of dust

extractors.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]