Clarke CSS 300 운영 및 유지보수 지침 매뉴얼 - 페이지 3
{카테고리_이름} Clarke CSS 300에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke CSS 300 11 페이지. Woodworker 13" scroll saw
페이지 인쇄
SAFETY PRECAUTIONS
GENERAL SAFETY RULES FOR OPERATING MACHINERY
As with all machinery, there are certain hazards involved with their operation and use.
Exercising respect and caution will considerably lessen the risk of personal injury. However, if
normal safety precautions are overlooked or ignored, injury to the operator may result.
1.
READ and BECOME FAMILIAR with the entire operating manual. Learn the machines'
applications and limitations as well as the specific potential hazards peculiar to it.
2.
ALWAYS ENSURE THAT ADEQUATE LIGHTING is available. A minimum intensity of 300 lux should
be provided. Ensure that lighting is placed so that you will not be working in your own shadow.
3.
CHECK for DAMAGE. Before using the machine, any damaged part, such as a guard etc.,
should be checked to ensure that it will operate properly, and perform its intended function.
Check for alignment of moving parts, breakage of parts, mountings, and any other condition
that may affect the machines' operation. Any damage should be properly repaired or the
part replaced. If in doubt, DO NOT USE the machine. Consult your local dealer.
4.
DISCONNECT the MACHINE from the power supply before servicing and when changing
accessories such as blades or working on the machine.
5.
KEEP GUARDS in place and in working order.
6.
ALWAYS WEAR SAFETY GOGGLES, manufactured to the latest European Safety Standards.
Also use face or dust mask if cutting operation is dusty. Everyday eyeglasses do not have
impact resistant lenses, they are NOT safety glasses.
7.
KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents.
8.
ALWAYS WEAR EAR PROTECTORS/DEFENDERS.
9.
DON'T FORCE the Machine. It will do a better / safer job at the rate for which it was designed.
10. REMOVE ADJUSTING KEYS AND WRENCHES. Form the habit of checking to see that keys and
adjusting wrenches are removed from the machine before switching on.
11. DRUGS, ALCOHOL, MEDICATION. Do not operate machine while under the influence of drugs,
alcohol or any medication.
12. USE RECOMMENDED ACCESSORIES. The use of improper accessories could be hazardous.
13. NEVER LEAVE MACHINE RUNNING UNATTENDED. Turn power OFF. Do not leave machine until it
comes to a complete stop.
14. EARTH ALL MACHINES. If the machine is equipped with three-pin plug, it should be plugged
into a three-pin electrical socket. Never remove the earth pin.
15. AVOID DANGEROUS ENVIRONMENT. Don't use power machines in damp or wet locations or
expose them to rain. Keep your work area well illuminated. DO NOT USE in explosive atmosphere
(around paint, flammable liquids etc).
16. KEEP CHILDREN AWAY. All visitors should be kept a safe distance from the work area, especially
whilst operating the unit.
17. MAINTAIN MACHINE IN TOP CONDITION. Keep tools sharp and clean for the best and safest
performance. Follow maintenance instructions.
18. DON'T OVERREACH. Keep your proper footing and balance at all times. For best footing,
wear rubber soled footwear. Keep floor clear of oil, scrap wood, etc.
19. WEAR PROPER APPAREL. Loose clothing or jewellery may get caught in moving parts. Wear
protective hair covering to contain long hair.
WARNING:
3