Clarke CSS16V 운영 및 유지 관리 지침 - 페이지 11

{카테고리_이름} Clarke CSS16V에 대한 운영 및 유지 관리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke CSS16V 15 페이지. 400mm (16") variable speed scroll saw

NOTES ON SAW BLADES

IMPORTANT: ALWAYS USE GOOD QUALITY BLADES

BLADES BREAK FOR FIVE PRINCIPAL REASONS:

1. Too much tension or too little tension on the blade.

2. Overworking the blade by feeding the workpiece too fast.

3. Twisting or bending the blade by feeding the workpiece off-centre.

4. Over use - the blade has reached the end of its useful life.

5. Feeding too much material into the saw, - more than the maximum 2" depth for

which it was designed.

HOW TO DETERMINE THE RIGHT BLADE FOR THE JOB

This scroll saw accepts a wide variety of blade widths and thicknesses. The width of the

blade , the thickness of the blade, and the number of teeth per inch (TPI) are determined

by the type of material and size of the radius being cut. Here are several examples:

TPI

WIDTH

2.8mm

0.11"

2.8mm

0.11"

2.4mm

0.095"

As a general rule, select the narrowest blades recommended for intricate curve cutting

and widest blades for straight and large curve operations.

THICKNESS

0.5mm

Medium curves on 1/4" to 1-3/4" wood, wallboard,

0.020"

hardboard.

0.5mm

Same as above, plus wood 1/8" to 1-1/2" thick

0.020"

0.25mm

Extra thin cuts on soft woods to 1/4" and parquetry

0.011

MATERIAL