Clarke DUO SAW 운영 및 유지보수 지침 매뉴얼 - 페이지 9

{카테고리_이름} Clarke DUO SAW에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke DUO SAW 20 페이지. Multi purpose 5”(125mm) twin blade saw

BEFORE USE

1. Fit the side handle to the Duo Saw

as shown.

When cutting Aluminium, Copper, Stainless Steel & Cast Iron you should use the

lubricating sticks to prevent the blades from overheating.

1. Slide the lubricating stick into the

lubrication stick holder as shown.

2. To lower the stick rotate the small

dial next to the lubrication stick

holder towards you.

3. Replacment lubricating sticks are

available from your CLARKE

dealer, Part number 6462049.

• ALWAYS support the workpiece near the cut.

• ALWAYS clamp the workpiece securely so it will not move during the

cut. Before starting a cut, draw a guideline along the desired line of

cut.

• ALWAYS keep the mains cord away from the cutting area.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]