Clarke MBS600D 조립 지침 매뉴얼 - 페이지 4

{카테고리_이름} Clarke MBS600D에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke MBS600D 9 페이지. 600 mm compound mitre saw

ASSEMBLY

GUIDE RODS, SAW FRAME AND BLADE

1. Attach the handle to the upright

part of the saw frame using the

two screws, with the nuts seated in

the handle moulding.

2. Connect the polymer guide

pieces to the saw frame assembly

as shown in Fig 1.

2. Insert the guide support rods

through the holes in each guide

piece as shown in Fig 2, noting

that two of the rods include a

small end stop. This must remain at

the top of the guide rod.

3. Slide a depth stop collar onto one

front and one rear guide rod from

below and lock in position with

the thumbscrew.

4. Lift the saw frame, complete with

guide rods, and place the guide

rods into their respective sockets

in the mitre angle carriage.

5. Tighten the grub screw for each

socket using a hexagonal key to

secure the saw frame/guide rod

assembly in place.

Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]

FIG 1

DEPTH STOP

COLLAR

FIG 2

FIG 3

FIXING SCREWS

FRAME

UPRIGHT

END STOP

SOCKETS

WITH GRUB

SCREWS