Clarke TS125 운영 및 유지보수 지침 매뉴얼 - 페이지 14

{카테고리_이름} Clarke TS125에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke TS125 20 페이지. Multi purpose 5”(125mm) twin blade saw

CHANGING THE CARBON BRUSHES

1. Remove the screw holding the

brush cover in place.

2. Slide out the carbon brush.

3. Replace with the new brush

supplied.

4. Repeat on the other side of the

body.

NOTE: Both brushes must be

replaced at the same time.

• To maintain the best possible performance from your Duo Saw, it

must be kept clean.

• To reduce fire hazard, keep the cooling vents free of debris.

• Clean the area around the spindle and keep the locking nut clean.

• Check the secondary handle and the guard for damage.

• Always have any damaged, or worn parts repaired, or replaced.

• Always have your Duo Saw inspected and maintained by qualified

service personnel. Do not attempt to repair the Duo Saw unless you

are qualified to do so.

Recycle unwanted materials instead of disposing of them as

waste. All tools, accessories and packaging should be sorted,

taken to a recycling centre and disposed of in a manner which is

compatible with the environment.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]