Clarke Woodworker CBS14WC 운영 및 유지 관리 지침 - 페이지 5

{카테고리_이름} Clarke Woodworker CBS14WC에 대한 운영 및 유지 관리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke Woodworker CBS14WC 17 페이지. 12”(305mm) & 14”(355mm)

페이지 인쇄

1. Blade Renewal

UNPACKING

Unpack the shipping carton and lay out all the items

so that they may be clearly identified as follows:

1. Main Frame Assembly

2. Motor Assembly

3. Switch Box Assembly

4. (CBS12WC) Table Assembly c/w Trunnions

(CBS14WC) Table Assembly comprising:

1 Table

2 Trunnions

1 Trunnion base

5. Mitre Gauge Assembly

6. (CBS12WC) Rip Fence

6. (CBS14WC) Rip Fence Assembly

comprising:1 Rip Fence

1 Rip Fence Guide

1 Guide Mounting Plate

7. 1 Bag containing

Allen Key

Adjusting Knobs

Bolts, Screws, Nuts & Washers

Check to ensure that no damage was suffered in

transit, and that all parts are accounted for. You should

contact your CLARKE dealer immediately, should

there be any damage or deficiency

FRONT

PRINCIPAL PARTS

A Blade Tension Adjuster Knob

B Blade Guard and Upper Guide Block

Securing Knob.

NOTE: This item is mounted on the back panel,

on model CBS12WC, as indicated by the

dotted line.

C Front Cover Securing Knobs

D Blade Guard

E Upper Blade Guide Block

F Switch Box

G Safety Switch

H Table Trunnion (fig. shows 12WC type)

I Table Tilt Adjuster Knob (fig. shows 12WC

type)

J Motor

K Rip Fence (fig. shows 12WC type)

L Mitre Gauge

M Dust Extraction Outlet

(Ref. Fig. 1)

Fig. 1