Clarke ZX-R Pro Series 운영 및 유지보수 지침 매뉴얼 - 페이지 6
{카테고리_이름} Clarke ZX-R Pro Series에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke ZX-R Pro Series 13 페이지. 20v cordless multi function tool
Clarke ZX-R Pro Series에 대해서도 마찬가지입니다: 작동, 유지보수 및 사용 설명서 (8 페이지), 운영 및 유지보수 지침 매뉴얼 (9 페이지), 운영 및 유지보수 지침 매뉴얼 (17 페이지), 운영 및 유지보수 지침 매뉴얼 (17 페이지), 운영 및 유지보수 지침 매뉴얼 (17 페이지)
페이지 인쇄
12. NEVER attempt to stop the saw blade with your fingers.
13. NEVER put the saw down on a table or work bench unless switched off. The saw
blade will keep running briefly after the tool has been switched off.
14. Wherever possible, use clamps and vices to fasten the workpiece securely.
15. Do not attempt to saw extremely small workpieces.
16. ALWAYS hold the saw with both hands.
RESIDUAL RISKS
The following risks are inherent to the use of reciprocating saws.
• Injuries caused by touching hot parts of the tool.
In spite of the application of the relevant safety regulations and the implementation of
safety devices, certain residual risks cannot be avoided. These are:
• Impairment of hearing.
• Risk of pinching fingers when changing the accessory.
• Health hazards caused by breathing dust developed when working
SPECIFICATIONS
Voltage
Battery Type
No-load speed
Stroke Length
Weight (without battery pack)
Dimensions (without battery pack) (L x W x H)
Guaranteed Sound Power Level (LWA)
Sound pressure Level (LPA)
Sound Uncertainty Value (K)
Vibration
Vibration Uncertainty Value (K)
MAX CUTTING CAPACITY
Wood
Metal
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
20 V DC
Li-Ion
0–3000 Strokes Per Min
18 mm
1.6 kg
438 x 76 x 145 mm
97 dB(A)
86 dB(A)
3 dB(A)
4.7 m/s²
1.5 m/s²
30 mm
6 mm
6