Clarke ZX-R Pro Series 운영 및 유지보수 지침 매뉴얼 - 페이지 10
{카테고리_이름} Clarke ZX-R Pro Series에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke ZX-R Pro Series 17 페이지. 20v cordless multi function tool
Clarke ZX-R Pro Series에 대해서도 마찬가지입니다: 작동, 유지보수 및 사용 설명서 (8 페이지), 운영 및 유지보수 지침 매뉴얼 (9 페이지), 운영 및 유지보수 지침 매뉴얼 (17 페이지), 운영 및 유지보수 지침 매뉴얼 (13 페이지), 운영 및 유지보수 지침 매뉴얼 (17 페이지)
LASER GUIDE
The laser guide helps keep the blade aligned with the cutting line.
1. Press the Laser on/off button to
turn the laser on.
• Do not point the laser beam at
people.
• Keep the laser beam below
eye level.
• Only turn on laser beam when
the tool is on the work piece.
2. Press the Laser on/off button
again to turn the laser off.
CUTTING TIPS
• Wait until the blade is running at full speed before attempting to cut
the workpiece.
• Do not put unnecessary pressure on the blade and avoid applying
lateral pressure.
• Take extra care when cutting curves - move the blade slowly to
avoid stress on the blade.
WOOD
• Check that any previously used timber being sawn does not contain
any nails or other metal objects which would damage the blade.
METAL
• Choose a suitable blade for cutting metal
• Lubricate the material and blade with cutting oil to prevent
overheating.
HOLE CUTTING
• When starting a cut from the center of a work piece, drill a 12mm
diameter hole to ensure that there is clearance for the blade
• Remember that the blade should emerge from the workpiece at
every point of the cut.
• When cutting tight curves, reduce the forward speed of the saw.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
10