Clarke 6925128 운영 및 유지보수 지침 매뉴얼 - 페이지 4

{카테고리_이름} Clarke 6925128에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke 6925128 13 페이지. 2.8kw workshop ptc heater

SAFETY RULES

Make sure that you read, understand and comply with the following.

WARNING: THIS PRODUCT IS ONLY SUITABLE FOR WELL INSULATED AREAS

AND IS NOT DESIGNED TO BE THE PRIMARY HEAT SOURCE.

• DO NOT operate the heater when you are tired or under the influence of

alcohol, drugs or intoxicating medication.

• DO NOT stand on the heater.

• DO NOT use the heater with wet hands or when there is water on the

power cable.

• Turn the heater off when not in use and keep it in a safe, dry location.

The heater is designed to heat enclosed areas larger than 4m

workshops and other industrial areas. Do not use the heater for any other

function. It is not suitable for drying clothes or laundry.

WARNING: THIS HEATER MUST BE EARTHED.

• Regularly inspect the power cable / plug for signs of damage/looseness.

DO NOT use the heater it the power cable is damaged.

• Minimise the risk of electric shock by installing a RCCB (Residual Current

Circuit Breaker) and a suitable isolator into the main distribution board.

• Make sure that the voltage on the rating label is the same as the voltage

of the power supply. If in doubt, consult a qualified electrician.

• DO NOT abuse the electrical cable. Never use the cable for pulling or

unplugging the heater.

• Keep the cable away from sources of heat, oil, sharp edges or moving

parts. Damaged or tangled cables increase the risk of electric shock.

• DO NOT use extension cables with this heater.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

, such as