Clarke 6925500 운영 및 유지보수 지침 매뉴얼 - 페이지 14

{카테고리_이름} Clarke 6925500에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke 6925500 17 페이지. Infrared diesel heater

CLEANING AND MAINTENANCE

WARNING: BEFORE CARRYING OUT ANY MAINTENANCE, ENSURE THE

HEATER IS SWITCHED OFF, DISCONNECTED FROM THE MAINS SUPPLY AND

HAS BEEN GIVEN ADEQUATE TIME TO COOL DOWN.

Correct maintenance is vital for smooth operation of the burner in order to

avoid wasting fuel and causing atmospheric pollution.

This heater should be inspected, cleaned and serviced annually by a qualified

service engineer. Unauthorised persons should not attempt to carry out repairs

of the burner components. In the event of damage or broken components,

replacements are available from Clarke Parts & Service Department.

CLEANING

1. Use a damp cloth wrung out in a solution of soapy water to clean the

exterior of the heater. Use mild household cleaners on difficult spots.

2. Never use abrasive cleaners as they may damage the paint finish.

3. If you suspect the fuel has become contaminated with dirt or water, empty

the tank and refill with fresh fuel.

4. The fuel filter should be removed

and inspected for cleanliness

before refilling the tank. If foul,

remove and clean if necessary by

rinsing in clean fuel.

5. The internal heating surfaces and

combustion chamber of the

burner should be cleaned at least

annually during servicing. This task

should be left to the Clarke

Service Department.

NOTE: Do not attempt to service the heater yourself. Servicing and

maintenance should be left to the Clarke Service Department.

STORAGE

1. For long term storage, always store the heater in a dry, well ventilated

space. Stand in a level position when filled, or fuel leakage may occur. It is

recommended to completely fill the tank with fuel for extended storage to

minimize condensation inside the tank.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]