Clarke 6926013 운영 및 유지 관리 지침 - 페이지 11

{카테고리_이름} Clarke 6926013에 대한 운영 및 유지 관리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke 6926013 17 페이지. Quartz halogen heater

• The programs will be displayed as 01, 02 and 03.

• The first two digits of the clock will flash and the word ON will be

displayed.

4. Use the + and - arrow keys to select the starting hour and press the WEEK

TIMER button to confirm.

• The second set of digits will flash.

5. Use the + and - arrow keys to select the starting minutes and press the WEEK

TIMER button to confirm.

• The display will show OF and the first two digits of the clock will flash.

You can now set the time the heater will turn off.

6. Use the + and - arrow keys to select the finishing hour and press the WEEK

TIMER button to confirm.

• The second set of digits will flash.

7. Use the + and - arrow keys to select the finishing minutes (in increment of

10) and press the WEEK TIMER button to confirm.

SETTING FURTHER PROGRAMS

1. Repeat the above steps to program each individual program/day.

ACTIVATING THE TIMER FUNCTION

1. To activate the TIMER mode press the TIMER On/Off button.

• The Day and Time will be shown on the display.

2. To turn the heater off press the TIMER On/Off button. The day and time will

be removed from the display and only temperature will be shown.

1. To clear a program press the WEEK TIMER button once scroll to the day that

needs to be reset using the left and right arrows.

2. Press and hold the TIMER On/Off button for approximately 3 to 4 seconds.

• A beep will be heard from the heater and the time for that program

will show 00:00. The program is then ready to be set once again.

Press the ECO button once to activate ECO mode.

• Only ambient room temperature will be displayed.

• Other lights on the display will switch off.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]