Clarke 6926016 운영 및 유지 관리 지침 - 페이지 6

{카테고리_이름} Clarke 6926016에 대한 운영 및 유지 관리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke 6926016 13 페이지. Halogen heaters

UNPACKING AND ASSEMBLY

Before assembling, please check contents against the following list and advise

your dealer immediately if any parts are missing.

1 x Heater

2 x Support Bars with casters (P only)

2 x Locking Knobs (SP only)

1 x Handle

10mm & 14 mm spanner (370PB/371PB),

10 mm spanner (370SPB/371SPB).

DEVIL 370PB /371PB

1. Attach the support bars to the heater

body using 14mm securing bolts supplied.

2. Attach the handle to the heater body

using four bolts and plastic blocks

supplied.

3. Unscrew the front guard and fit the

halogen tubes (see page 7).

DEVIL 370SPB/371SPB

1. Bolt the three parts of the frame together

at positions 1 & 2.

2. Attach the frame to the heater body as

shown, using the locking knobs and the

plastic packing pieces at positions 3 & 4.

NOTE: The larger packing piece should fit

nearer the heater.

3. Unscrew the front guard and fit the

halogen tubes (see page 7).

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

2 x Quartz Halogen Tubes

x Frame with casters (SP only)

2 x Packing Pieces (SP only)

1 x Fixings pack