Clarke 6931004 운영 및 유지보수 지침 매뉴얼 - 페이지 8

{카테고리_이름} Clarke 6931004에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke 6931004 17 페이지. Diesel/paraffin heaters
Clarke 6931004에 대해서도 마찬가지입니다: 운영 및 유지보수 지침 매뉴얼 (17 페이지)

페이지 인쇄

PREPARATION

FUEL TYPES

Diesel or paraffin are the only fuels that should be used in this heater.

FILLING THE FUEL TANK

IMPORTANT: Before filling the fuel tank the first time or after extended

storage periods, drain the fuel tank of any moisture or condensation.

1. Follow all of the "Safety Precautions".

2. Remove the fuel cap.

NOTE: If you lose the fuel cap a

replacement must be

obtained before use, this is

available from your local

Clarke service department

part number GF0K070000.

3. Fill the fuel tank with clean diesel

or paraffin.

• In cold weather, condensation

may develop in the tank if the tank is empty and it is recommended

that a tablespoon of de-icer be added for each gallon of fuel in the

tank.

• When filling the heater, make sure that the heater is level and do not

overfill. Use a funnel or can with a long fill spout.

• Fill with a minimum of 5 litres for the XR60B, 6 litres of fuel for the XR80

& XR110, or 10 litres the XR160 and XR210.

HEATER LOCATION

• Locate heater at a safe distance from combustible materials.

• When used, the heater should rest on suitable insulating material at

least 1 inch thick and extending 3 ft. or more beyond the heater in

all directions.

• Only operate on a flat level and stable surface.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]