Clarke Devil 370SP 운영 및 유지 관리 지침 - 페이지 6

{카테고리_이름} Clarke Devil 370SP에 대한 운영 및 유지 관리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke Devil 370SP 13 페이지. Devil quartz infra-red halogen heaters

UNPACKING AND ASSEMBLY

Before assembling, please check contents against the following list and

advise your dealer immediately if any parts are missing.

1 x Heater

2 x Halogen Lamps

1 x Frame (SP only)

2 x Saddle Supports (SP only) 2 x Handles (P only)/1 x Handle (SP only)

1 x Fixings pack

7mm, 13mm and 14mm spanners, pozidrive

(phillips) screwdriver

DEVIL 370 /371P

1. Attach the four castors to the support legs

using the 13mm nuts.

2. Attach the legs to the main body using

14mm securing bolts supplied.

3. Attach the handles to each side of the

heater body using the screws supplied.

4. Fit the halogen lamps (see page 7).

DEVIL 370SP/371SP

1. Attach the four castors to the frame

using the 13mm nuts.

2. Attach the handle to the heater body

using the screws supplied.

3. Attach the frame to the heater body

as shown in the drawing, using the

securing knobs and the plastic saddle

supports located either side of the

frame tubing.

4. Fit the halogen lamps (see page 7).

4 x Castors (2 with brakes)

2 x Support Legs (P only)

2 x Securing Knobs (SP only)