LEGO MINDSTORMS Education EV3 MicroPython 시작하기 - 페이지 8
{카테고리_이름} LEGO MINDSTORMS Education EV3 MicroPython에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. LEGO MINDSTORMS Education EV3 MicroPython 17 페이지.
페이지 인쇄
Getting started with LEGO
the EV3 Brick
1.5.1 Turning the EV3 Brick on and off
Turn on the EV3 Brick by pressing the dark grey centre button.
The booting process may take several minutes. While booting, the EV3 Brick Status Light will turn orange and
blinks intermittently. There will be text on the EV3 Display. The EV3 Brick is ready for use when the Status Light
turns green.
To turn the EV3 Brick off, open the shutdown menu with the back button, and then select Power Off using the
centre button, as shown in Figure 1.5.
MINDSTORMS
®
First, turn off
Add a piece of
tape for easy
removal of
the card.
Figure 1.4: Inserting the flashed microSD card into the EV3 Brick
1
Main menu
2
Press back button
Figure 1.5: Turning the EV3 Brick off
LEGO, the LEGO logo and MINDSTORMS are trademarks of the LEGO Group.
©2019-2020 The LEGO Group.
Education EV3 MicroPython
®
Place the card
in the SD slot,
text side up
3
Power Off
Version 2.0.0
6