LEGO Mindstorms EV3 사용자 설명서 - 페이지 9
{카테고리_이름} LEGO Mindstorms EV3에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. LEGO Mindstorms EV3 36 페이지.
LEGO Mindstorms EV3에 대해서도 마찬가지입니다: 지침 (5 페이지)
페이지 인쇄
EV3 TECHNOLOGY
EV3 Brick
The EV3 Brick requires six AA/LR6 batteries if the EV3 Rechargeable
Battery is not used. Alkaline or rechargeable Lithium Ion AA batteries
are recommended. The AA batteries option is a good choice when
a little more weight is desirable in your robot.
To install the AA batteries, remove the battery cover on the back of
the EV3 Brick by pressing the two plastic tabs on the side. After you
have inserted the six AA batteries, attach the battery cover again.
SOME IMPORTANT INFORMATION ABOUT BATTERIES:
+
Never use different kinds of batteries together
(including mixing old and new).
+
Remove batteries from the EV3 Brick when not in use.
+
Never use damaged batteries.
+
Use the correct battery charger under the supervision of
an adult.
+
Never attempt to recharge batteries that are not rechargeable.
Note: If your batteries are weak, the Brick Status Light may stay red
after you press the Start button, while the Display continues to say
"Starting."
POWER-SAVING PRACTICES
+
Remove batteries between use.
Remember to keep each set of batteries in its own storage
container so they can be used together.
+
Reduce Volume.
+
Adjust Sleep Setting.
+
Turn off Bluetooth and Wi-Fi when not in use.
+
Avoid unnecessary wear on the motors.
LEGOeducation.com
LEGO, the LEGO logo, MINDSTORMS and the MINDSTORMS logo are trademarks of the/
sont des marques de commerce de/son marcas registradas de LEGO Group. ©2013 The LEGO Group. 041329.
1
3
Low Battery Power Indicator
2
AA, 1.5V x 6
4
9