Clarke DEVIL 7015 운영 및 유지보수 지침 매뉴얼 - 페이지 7

{카테고리_이름} Clarke DEVIL 7015에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke DEVIL 7015 17 페이지. 30kw electric fan heater

ELECTRICAL CONNECTIONS

WARNING: THE INSTALLATION OF THIS APPLIANCE SHOULD BE CARRIED

OUT BY A COMPETENT ELECTRICIAN AND BE IN ACCORDANCE WITH THE

CURRENT IEE WIRING REGULATIONS (BS7671-2:2008).

This machine MUST be connected to a 400 Volt, 3 phase 50Hz supply through a

suitably rated isolator switch. It cannot be operated from a single phase

supply.

The user should purchase a suitable connecting cable capable of handling 63

Amps (recommended Cross Sectional Area 10mm

63A (or better) which complies with BSEN 60309. A length of 2-3 metres is

recommended giving mobility to the appliance but without becoming a trip

hazard

If in any doubt, consult a qualified electrician. DO NOT attempt any electrical

work yourself.

The Devil 7030 has a thermal cut out to prevent the unit from overheating.

If the temperature of the front grille gets too high the thermal cutout will turn

off the heating elements. When the fan has cooled the unit sufficiently, normal

operation will resume.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

) and supply plug rated at