Clarke XR110 운영 및 유지보수 지침 매뉴얼 - 페이지 11

{카테고리_이름} Clarke XR110에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke XR110 17 페이지. Diesel/paraffin heaters
Clarke XR110에 대해서도 마찬가지입니다: 운영 및 유지보수 지침 매뉴얼 (17 페이지)

페이지 인쇄

FILTERS

Dirty air filters will cause an imbalance in the air-fuel mixture. The best

indication that this condition exists is an increase in odour or difficulty getting

your heater to ignite. This heater should never be operated without the filters in

place. If required, clean the filters as follows.

ACCESSING THE FILTERS

1. Make sure that the plug is removed from the power supply before carrying

out any maintenance.

2. Remove the six screws shown and

remove the top cover of the

heater.

NOTE: There may be eight screws on

the larger models.

3. Lift out the rear guard.

4. Remove the 3 screws securing the

filter cover.

5. Pull the filter cover away from the

motor.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]