Clarke XR55 운영 및 유지 관리 지침 - 페이지 6
{카테고리_이름} Clarke XR55에 대한 운영 및 유지 관리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke XR55 20 페이지. Paraffin/diesel heaters
페이지 인쇄
ASSEMBLY
1. Slide the axle (6) through the wheel support frame (3), and install the wheels
on the axle.
NOTE: The extended wheel hubs should be facing inwards.
Position the caps (5) on the axle ends and gently tap with a hammer to secure.
2. Position heater on the wheel support frame assembly, with air outlet end over
the wheels.
3. Use the screws and nuts (7) to attach the handle (2), to the top of the fuel tank
flange. The screws will go through the handles, the fuel tank flange, and the
wheel support frame.
4. Tighten all nuts.
OPERATION
Understanding the basic operation of the heater, will reinforce the need to
maintain the unit in top condition at all times, whilst always observing the safety
precautions.
The heater comprises four basic systems:
1.
The fuel system.
2.
The air system.
3.
The ignition system.
4.
The safety control system.
Fig. 2
ref. Fig.1
6