Clarke 1801877 사용자 지침 - 페이지 3

{카테고리_이름} Clarke 1801877에 대한 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke 1801877 4 페이지. Lazy tongs rivet gun

OPERATION

1. When items are to be riveted

together, the hole diameter must

be nominally larger than the outer

diameter of the rivet. Ensure that

the hole is perpendicular with the

surface of the workpiece

components.

2. Insert the rivet into the hole of the

workpiece components.

3. Pull the handle back to extend

the rivet gun to its full length.

• This will enable the rivet stem to

enter the rivet gun as far as it will

go, with the handle fully

extended.

4. Ensure the rivet gun is

perpendicular to the work piece

and the flange of the rivet is

pressed against it.

5. Push the rivet gun handle fully

forward to expand the rivet.

6. If the rivet stem does not break off

at the first stroke, pull back the

handle and repeat step 6.

7. Extend the rivet gun by pulling the

handle back and the broken stem

should be ejected from the

nozzle.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]