Clarke 3120152 운영 및 유지 관리 지침 - 페이지 3

{카테고리_이름} Clarke 3120152에 대한 운영 및 유지 관리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke 3120152 13 페이지. Air hammers

GENERAL SAFETY RULES

CAUTION: FAILURE TO FOLLOW THESE PRECAUTIONS COULD RESULT IN

PERSONAL INJURY, AND/OR DAMAGE TO PROPERTY.

1. Keep the work area clean and tidy.

2. Dress appropriately - Do not wear loose clothing or jewellery. Tie long hair

out of the way.

3. Keep children and visitors away - Do not let children handle the tool.

USE

1. Stay alert and use common sense - do not operate this tool when you are

tired or under the influence of alcohol, drugs or medication.

2. Always wear eye protectors when using air tools. Eye protectors must

provide protection from flying particles from the front and the side.

3. Always wear ear protectors and a dust mask when using an air hammer.

4. Do not overreach - keep proper footing and balance at all times.

5. Do not fit the tool to any stand or clamping device that may damage it.

6. Never use oxygen, CO

source of power for the grease gun. This product should only be used with

a suitably rated compressed air supply.

7. Do not connect the air hose with your finger on the trigger of the tool.

8. Keep the air supply hose away from heat, oil and sharp edges.

9. Do not exceed the maximum pressure for the tool of 90 psi / 6.2 bar.

10. Check hoses for leaks or excessive wear before use, and ensure that all

connections are secure.

11. Do not use the tool for any other purpose than described in this manual.

12. Do not carry out any alterations or modifications to the tool.

13. Always disconnect from the air supply when:

• Performing any maintenance.

• The tool is not in use.

• The tool will be left unattended.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

, combustible gases, or any bottled gas, as a