Clarke 6462001 사용자 지침 - 페이지 6

{카테고리_이름} Clarke 6462001에 대한 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke 6462001 13 페이지. 40-piece rotary tool kit

ASSEMBLING POLISHING BOB

• Screw the Bob on to the mandrel firmly, but do

not overdo it.

5. Assembling Abrasive Bands

• Slacken the screw on the end

of the mandrel and slide the

appropriate abrasive band on

to the rubber former, fully.

• Tighten the screw to secure

the band to the former.

ATTACHING THE FLEXIBLE DRIVE ASSEMBLY

• Unscrew and remove the Securing Ring (3) and

retain.

• Slacken the chuck using the spanner provided,

by pressing and holding the locking button (5).

• Slide the flexible drive through the chuck and

FULLY into the collet.

• Hold back the Securing Ring (3), whilst tightening

the chuck, thereby securing the flexible drive.

• Screw the Securing Ring (3) on to the end of the

tool, taking GREAT CARE to not to cross-thread it.

• At the opposite end of the Flexible Drive, insert

the mandrel of the tool to be used into the

chuck.

To undo the chuck, pull back on the sleeve in the

direction of the arrow and hold back to lock the drive

so that the spanner may be used.

Insert the mandrel fully, then re-tighten the

chuck.

Release the sleeve to release the drive.