Afterglow 25XY92001 매뉴얼 - 페이지 7

{카테고리_이름} Afterglow 25XY92001에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Afterglow 25XY92001 17 페이지. Cottage 34 in square gas fire pit

NOTE: Tool Required for Assembly: phillips screw driver ( NOT included)

1. Carefully unpack all parts from the box, compare parts with package content listed above, make sure all

parts are present before beginning assembly of product. If any part is missing or damaged, do not attempt

to assemble the product. Contact customer service for replacement parts.

2. Attach the Left Panel (C) to Front-Left Leg (H) and Back-Left leg (I) with Bolt (AA) and Washer (BB) by using

the Hex Screw Driver (CC). Attach the Back Panel (E) to Back-Right Leg (G) and Back-Left leg (I) with Bolt

(AA) and Washer (BB) using the Hex Screw Driver (CC), (see Figure 2).

NOTE: DO NOT tighten the screws completely.

Hardware Used:

AA Bolt (M6 x 15)

BB Washer (M6)

CC Hex screw driver

3. Attach the Right Panel (B) to Front-Right Leg (F) and Back-Right leg (G) with Bolt (AA) and Washer (BB) using

the Hex Screw Driver (CC), (see Figure 3).

NOTE: DO NOT tighten the screws completely.

Hardware Used:

AA Bolt (M6 x 15)

BB Washer (M6)

CC Hex screw driver

4. Attach the Upper Beam (J) to the Front-Left Leg (H) and the Front-Right leg (F) with Bolt (AA) and Washer

(BB) using the Hex Screw Driver (CC). Attach the Bottom Beam (K) to the Front-Left Leg (H) and the

Front-Right leg (F) with Bolt (AA) and Washer (BB) using the Hex Screw Driver (CC), (see Figure 4).

NOTE: DO NOT tighten the screws completely.

ASSEMBLY INSTRUCTIONS

x 8

x 1

x 4

x 1

Figure 2

Figure 3